 |
PPC Cable Tie Tool - T3DY
Tensioning tool for manual cutting. Designed for self-locking ties. With squeezing handle to provide continuous tension for cable tie installation. Cuts the strap flush with the head
|
|
 |
Aluminum Extension Bracket 29-19944
Diamond’s Aluminum extension bracket is used in CATV drop installations to secure a tap to the messenger strand. The bracket can be bent at any point to achieve the desired horizontal location.
|
 |
 |
Aluminum Tap Bracket 29-19943
Diamond’s versatile Tap Bracket is used in CATV drop installations to secure either a tap or traps to the messenger strand.
|
|
 |
Drive Hook 40-43007, 40-43008
The Diamond Drive Hook is used in aerial construction for supporting bail-type drop wire clamps, service drops and dead end clamps to crossarms, poles and buildings.
|
|
 |
“E” Cable Lashing Clamp 26-09020
The Diamond “E” Cable Lashing Clamp is used in CATV and telephone aerial construction to secure lashing wire terminations at any interruption to cable span continuity, or end of lashing wire coil.
|
|
 |
Fiber Optic Rack Hanger 29-19945
Diamond’s Fiber Optic Rack Hanger is designed to secure ber optic storage devices (snow shoes) to the strand.
|
|
 |
Lashed Cable Supports
The Diamond Lashed Cable Support is used to strap CATV and telephone cable to the messenger strand in aerial construction.
|
|
|
Snap-On Tap Bracket 29-19941
The Diamond Tap Brackets are used in CATV drop installations to secure a tap to the messenger strand where the tap can- not be attached directly to the strand, or where additional working space is desired between the tap and the strand.
|
|
 |
“D” Lashing Clamp 26-09010
"D" Lashing Clamps are used in aerial construction to secure lashing wire terminations at any interruption to cable span continuity or end of lashing wire coil.
|
|
|
Bridle Rings
Bridle Rings are used to support cable runs and electrical wiring.
|
|