Add content here.
As in-home networking services continue to grow, you need strong protection to give your subscriber the best multi-room DVR experience. Physically isolating the home through the installation of a low-pass filter at the point-of-entry is necessary to avoid interference from near-by MoCA® users, such as a neighbor. This patented technology prevents interference between homes that use MoCA, and acts as a reflector to minimize MoCA® signal loss in the home.
PPC’s MoCA® filter offers next generation, future-proof technology. Designed not only to isolate a MoCA® signal and keep out interference in any Multi-room network devices like set top boxes and routers, the PPC MoCA® filter also can be used in the house to protect the AGC in non-MoCA® devices like a cable modem. The PPC MoCA® filter is DOCSIS 3.0 ready and is built to protect your network as technology and in-home services continue to advance in the future.
The PPC MoCA® filter is optimized to protect your network and subscriber experience: it can withstand minor and major surges, keeping content flowing and service calls down.
|Bandwidth||5 MHz to 1525 MHz|
|Impedance||75 Ohms (nominal)|
|Return Loss||5-1002 MHz||-14 dB min|
|Insertion Loss||5-1002 MHz||-2.5 dB max|
|1125-1525 MHz||-35 dB min|
|Group Delay||5 ns|
|Surge Withstand||6 kV B3 Ring Wave|
|RFI Shielding||-140 dB|
|Operating Temperature||-40° F to +140° F (-40° C to +60° C)|
|Female Contact Retention Force||200 grams|
|Physical Dimensions||SNLP-1GCW||0.50 x 1.94|
|SNLP-1GCWWS||0.58 x 2.17|
|Meets or Exceeds all SCTE Specifications|