PPC’s MPO-LC Uni-boot Harness provides fast and precise connections from patch panels to high-density servers and switches. The furcation housing is extremely compact and with a cable diameter of only 3 mm, the single cord construction reduces cable consumption by as much as 50% compared to conventional Figure 8 duplex cables. Harnesses can be supplied with straight tails or staggered tails to match the particular equipment and port numbering scheme on the equipment. Each harness tail is numbered behind the boot for easy identification, and cables and connector shrouds are color-coded depending on the fiber type required. An optional pulling tab at the rear of the connector provides unparalleled access to connectors, and allows users to make fast moves, adds and changes even in applications where LC ports are stacked directly adjacent to one another. Polarity reversal is also possible with the uni-boot connectors (TYPE 2) thanks to a simple locking trigger, which allows the shroud to be pulled back and the connectors to be rotated 180°.